EIFS STUCCO - BASECOAT/ADHESIVE
Basecoat Wet
ADEX BASECOAT is a 100% acrylic polymer-based compound, mixed with Portland cement. ADEX BASECOAT is used to embed ADEX reinforcing mesh to create the lamina for all ADEX EIFS installations. It is also used to adhere insulation boards over a variety of ADEX Membranes and approved substrates, and as a skim coat to level concrete and masonry surfaces.
-
“Wet” polymer based.
-
Basecoat and Adhesive.
-
Mixed 1:1 (by weight) with Portland Cement.
-
Vapour permeable.
-
Application thickness of 1.6 mm to 2.4 mm (1/16” to 3/32”) per coat.
-
Meets the CAN/ULC S114 non-combustibility standard.
Basecoat Dry
ADEX DRYMIX basecoat is a one-component, 100% acrylic polymer, cement based powder that is mixed with water. ADEX DRYMIX basecoat is used to embed ADEX reinforcing mesh to create the lamina for all ADEX EIFS installations. It is also used to adhere insulation boards over a variety of ADEX Membranes and approved substrates, and as a skim coat to level concrete and masonry surfaces.
-
“Dry” polymer based, just add water
-
Basecoat and Adhesive
-
Vapour permeable
-
Application thickness of 1.6 mm to 2.4 mm (1/16” to 3/32”) per coat.
Portland Cement
LAFARGE Portland Cement is a cost-effective basic building material. It can be used in a wide variety of commercial and architectural concrete construction applications. Uses include cast-in-place, pre-cast, tilt-up, water tanks, drains, bridges, roads, pipes, concrete masonry units, pre-stressed concrete members, masonry mortars and grouts.